Skip to main content

Independent Stage 11 Forged Titanium

$119.99
(No reviews yet) Write a Review
Gift wrapping:
Options available

Ultra lightweight, mid-profile truck with the highest strength to weight ratio.

15% lighter than Stage XI
53.5mm tall

356 Aluminum Hanger
Forged 6061 Aluminum Baseplate
Solid Titanium Axle
Hollow Chromoly Kingpin

 
HEIGHT
53.5 mm
 
AXLE
129 - 7.60 in
139 - 8.00 in
144 - 8.25 in
149 - 8.50 in
159 - 8.75 in
 
HANGER
129 - 127 mm
139 - 137 mm
144 - 144 mm
149 - 149 mm
159 - 156 mm
 
WEIGHT
129 - 331g
139 - 338g
144 - 348g
149 - 358g
159 - 362g

 

What Size Trucks Do I Need For My Board?

Deck Width* Axle Independent Krux Bullet
6.65 - 7.15 6.9 in 109 - 110
7.35 - 7.85 7.6 in 129 7.6 130
7.75 - 8.25 8.0 in 139 8 140
8.00 - 8.50 8.25 in 144 8.25 -
8.25 - 8.75 8.5 in 149 8.5 150
8.50 - 10.40 8.75 in 159 - -
8.75 - 10.40 9.0 in - 9.0 -
8.88 - 10.40 9.125 in 169 - -

*Deck range recommendation varies depending on type and width of wheels

Do I Need Riser Pads?

When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid 'wheel bite'. Don’t know what 'wheel bite' is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will 'bite' and stop rolling. This often means that you go flying off your board. So if you're running bigger wheels make sure to read through this chart. While it might look like homework it's definitely more fun than hitting the pavement!

Truck Height** Wheel Range***
48.5 - 52 49 - 53
52 - 53.5 51 - 55
53.5 - 55 53 - 57
60 55 - 59

If you are ordering risers for your complete, please make sure you have chosen hardware that accommodates the height of your risers. 1¼" hardware will work with ⅛” risers and 1½” is needed for ¼” risers.
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.

What Size Hardware Do I Need For My Board?

When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.

Wheel Size Riser Size Hardware Size  
    7 ply deck 9 ply deck
49 - 55 - 7/8" -
55 - 58 1/8" 1" -
57 - 60 1/8" - 3/8" 1 1/4" 1 1/4"
60 - 65 3/8" - 1/2" 1 1/2" 1 1/2"